KD-TS2-type furnace front iron water analyzer

KD-TS2-type furnace front iron water analyzer

The iron water analyzer in front of the furnace is also called the carbon silicon analyzer, the carbon silicon ingredient analyzer, and the carbon silicon volume meter in front of the furnace. When producing iron parts, choose accurate chemical components according to the thickness of the casting wall and casting conditions to achieve the required mechanical properties. When other conditions are the same, carbon volume has a decisive impact on the tissue, casting performance and mechanical properties of cast iron gold phase. In the production of the ball iron, only Huai determined the carbon volume of the raw iron water to provide data to the breeding process.

The main parameter of the KD-TS2 furnace front iron water analyzer:

1. Measurement function: The heat analysis of the white -mouth iron, gray -mouth cast iron, and ball cast iron.

2. Measurement parameters: Iron water CEL, C, Si, TL, TS, △ T, △ TM determine the tensile strength RM and hardness HB

3. Read the test results straight, and automatically print CEL, C, Si, △ T, △ TM, tensile strength RM, hardness HB, peak temperature PEAK, liquid temperature TL, solid phase temperature TS, common crystal SC Essence

4. Temperature measurement range: 1250 ℃ ～ 1350 ℃

5. Precision: ≤ ± 1 ℃ Cel ± 0.047% C ± 0.039% Si ± 0.1%

6. Measurement range: C: 2.1 ～ 4.2%SI: 0.30 ～ 5.0%CEL: 2.5 ～ 5.0%

7. Show: 4 -bit LED display word height 50mm Resolution: 1 ℃

8. Work parameters: Electric Source AC 220V, 50Hz; power 30W, ambient temperature 0 ～ 50 ℃

9. The range of temperature compensation: 0 ～ 15 ℃

10. Supporting sample cup type: K type

11. Display temperature unit: Hua's temperature or temperature of Celsius can be set

12. Measurement time: 240 seconds (usually 1 minute 45 seconds)

13. Measurement status display: "Prepare" green lights on the instrument, "measure" yellow light, "complete" red light display

14. Operation method: 9 button to select the required parameters, in which "Auto" shows CEL, C, SI, and corrected C SI content through the potentiometer.